How many square feet is a yard of concrete 4 inches thick? One Cubic Yard of Concrete: 4-inches thick – covers 81 square feet.
Also, How much does it cost to pour a 10×12 concrete slab?
Cost of concrete per square foot
|Slab Size||Square Feet||Average Cost|
• 21 nov. 2021
How much does it cost for 10 yards of concrete? The average cost of concrete delivery is $119 to $147 per cubic yard for a full 10-yard truckload of ready-mix concrete, and $172 per yard for a short-load of less than 10 yards. The cost of concrete to pour a sidewalk is $255 to $320, while a driveway or garage slab runs $1,060 to $1,270.
What does a yard of concrete cost?
On average, homeowners pay $117 per cubic yard of concrete, with a typical cost range between $104 and $144 per cubic yard.
How many 80lb bags of concrete make a yard?
One 80lbs bag of Quikrete Concrete Mix will yield approximately . 60 cu ft. So it will take 45 bag to equal one cubic yard of concrete.
Is it cheaper to pour your own concrete?
Whether you’re pouring concrete countertops or a patio out back, it may be cheaper to pour concrete yourself rather than hiring someone. Whether you’ll save much in doing so depends largely on the amount of concrete needed and the amount of time you have to invest in your concrete project.
How much would a 40×60 concrete slab cost?
How much does a 40×60 concrete slab cost? It would be about $8,500 to $12,000 for a 40×60 foot concrete slab, 6 inches thick. That’s based on national averages of around $5 per square foot for a fully engineered, finished concrete slab, including labor and materials.
How thick should a concrete slab be?
Standard concrete floor slab thickness in residential construction is 4 inches. Five to six inches is recommended if the concrete will receive occasional heavy loads, such as motor homes or garbage trucks. To prepare the base, cut the ground level to the proper depth to allow for the slab thickness.
How much does it cost to pour a 24×24 slab of concrete?
A typical 24×24 garage slab costs between $3,057 and $5,944 with prices ranging from $5.31 to $8.31 per square foot for a 4” reinforced slab of concrete, and $6.83 to $10.32 per square foot for a 6” slab of reinforced concrete.
How much does a 24×30 concrete slab cost?
A 24×30-foot slab covers 720 square feet. With an average price of $6 per square foot, you may pay about $4,320 for a slab foundation. However, the price can range from $4 to $8 per square foot, resulting in a total cost between $2,880 and $5,760.
Is mixing your own concrete cheaper?
One of the least expensive ways to get concrete is to mix your own. You can buy bags of the mix from a home improvement store. … Otherwise, you risk getting a weaker concrete once it cures, which could lead to cracks or crumbles within a couple of years.
How many bags of quikrete do I need for a 10×10 slab?
90lb bag of concrete yields about 0.025 cubic yards, total required concrete quantity for 10 × 10 slab of 6 inch thick = 1.85 cubic yard , so number of bags of 90lb of concrete = 1.85/0.025= 74bags, therefore 10 × 10 slab of 6 inch thick, generally you need 74 bags of 90lb ready mix concrete.
How many wheelbarrows are in a yard of concrete?
Depending upon your wheelbarrow size (i.e. 2 or 3 cubic feet per wheelbarrow load), it will take 9 to 14 full loads to equal 1 cubic yard.
How many bags of concrete is 2 yards?
There’s 27 cubic feet of concrete in a yard. If you divide 27 by . 45 it equals 60 bags of concrete.
Do you need rebar for 4 inch slab?
Rebar is not necessary for every concrete project. The general rule of thumb is that if you are pouring concrete that is more than 5 inches in depth, you are probably going to want to add in some rebar to help reinforce the entire structure.
How much does a 30×50 concrete slab cost?
The base cost of material for a 30×50 concrete slab is between $2.83 and $5.47 per square foot. The total cost may range from $4,245 to $8,205. However, hiring a contractor may cost between $6 and $8 per square foot, bringing the price range to $9,000 to $12,000. The biggest cost is the material.
How long does it take for 4 inches of concrete to cure?
Your concrete should be solid enough to walk on, without leaving footprints, after anything from 24 to 48 hours. By seven days, your concrete should be cured to at least 70 percent of its full strength.
How strong is 4 inches of concrete?
A concrete patio slab should be at least 4 inches thick and have a compressive strength of 3,000 PSI.
How much does a 2 car garage slab cost?
It doesn’t include labor, supplies such as reinforcing bar, if needed, or building permit fees. At the time of publication, the average cost of concrete for a 400-square foot slab, the typical size for a two-car garage, ranges between $583 and $637 or between $1.46 and $1.59 per square foot.
How much does a 2000 square foot foundation cost?
Foundations vary in design and materials, so costs vary greatly. An average home is about 2,000 square feet and a foundation can cost from $13,000 (including materials, labor and permitting) to more than $40,000 if it’s a basement foundation.
Is it cheaper to lay concrete or pavers?
As far as installation costs and concrete costs go, poured concrete is technically the most affordable per square foot. However, even though the upfront cost of pavers is higher, concrete pavers offer greater value and durability than poured concrete and stamped concrete.
How much does a 10×20 concrete patio cost?
How Much Does a 10×20 Concrete Patio Cost? A concrete patio costs between $4 and $12 per square foot, including materials and labor. Based on those estimates, a 10-foot by 20-foot concrete patio would cost between $800 and $2,400.